|
|
|
Mounting magnetic signs Before you apply the sign, make sure the application surface is completely clean. Magnetic signs will only adhere to steel parts. Magnetics will not adhere to fiberglass or "bondo" repaired body parts. Using soapy water to wash the surface is recommended, then completely drying with a clean towel. Now, do the same to the back (application surface) of the magnetic sign. To apply the sign, start by putting one edge down, along a level reference point (usually the best reference is the bottom of a door or other trim that is level with the ground- not the top of the door or window). Gently lay the rest of the sign down- smoothing it as you go. Our magnetic sheeting is magnetized throughout, versus in ‘bands’, therefore when it is flat should not have any ‘bubbles’ under the surface. If you must reposition the sign after it’s down- DO NOT SCOOT IT- remove it completely and start over. Never move the sign when affixed to the metal, this may damage the paint on the vehicle and degrade the magnetic surface. |
|
To ensure the best possible pricing with the highest quality of materials, we do most of our bids via e-mail. In this manner we can provide a proofs, make any adjustments and then a final bids while maintaining labor costs. Appointments are made for any graphic work and for all all drop offs and pick ups. You can email your artwork or design to us for a speedy quote. |